[LDi] Liquid Dynamics International Liquid Dynamics International Inc. Click here to: Contact Liquid Dynamics Liquid Dynamics offers pulsation, vibration, and shock analysis, diagnostics, and software models. Fluid Flow Control Animations
Animations

INTERPRETING
OSCILLOGRAPHS
Pub 2 Main Menu


6 examples

Gear & Packed Plunger Systems

Dosing, Air Op. &"Metering" Systems

Plunger & Valve Motions

Multi Plunger & Centrifugal Systems

Acceptable Maximums

PDF CATALOG
CONTACT US

LDi Catalog Printable PDF16

LDi Pulsation Analysis - target image Ultra stable circuits with gear pump. Typical packed plunger systems.

Gear Metering smooth systems
Gear / Smooth Systems

Packed Plunger shockless systems
Packed Plunger Shockless Systems

Other

"Totally" smooth gear pump metering systems
Pressure feed to Gear Meter
Before Bottle installation
Discharge From Gear Meter
Before Bottle installation
Pressure feed to Gear Meter
After Bottle Installation
Discharge From Gear Meter
After Bottle Installation
Pressure feed to gear meter before bottle installation.
Discharge From Gear Meter Before Bottle Installation
Pressure Feed to Gear MEter After Bottle Installation
After Bottle Install
You are examining to find fluctuations as small as part of 1psi in several thousand (see last frequency)

Minimum dead volume, packed plunger pump systems
Packed Plunger System

 

Example: high viscosity resin/polymer hot oil jacket Jacketed double layer diaphragm feed pump creates flow fluctuations Heating circuit pump Example: 23 tooth gear pump, minimum chance of resonance Constant supply in – low ripple out Lifts pressure from 50 Bar to 100 Bar and provides precise flow within 0.5% All ripple has gone Metal bellows type, liquid expansion and contraction volume compensator for temperature change in closed loop circuit Spinnerette heads 0.1% DQ Denier checked by laser beam precisely Web coating For sealed systems the diaphragm seal is behind the packing RV and flow controllers are liable to make more pressure pulsation than a packed plunger pump Pump stroke Acoustics left in pipe Pump stroke Return Heat exchanger Filter strainer Supply Packed plunger pumps provide high volumetric efficiency almost no velocity jump shock free injection systems with high pressure capability
TOP OF PAGE

 

Liquid Dynamics International provides pipeline and pump user problem analysis, diagnostics, prediction by software, pulsation analysis, piping system analysis, and piping system simulation. For water hammer and shock solutions pulsation dampening and shock alleviating devices can be obtained from our associate websites.

PulseGuard Inc., and Ltd. for further information about pulsation dampeners / pulsation dampers.
PulseGuard. USA: Pulsation Dampeners | Pulsation-Dampeners.com: Pulsation Dampeners
PulseGuard Limited: Pulsation Dampers | PulseGuard für Deutschland: Pulsationsdämpfer

Large pressure vessels, jumbo bladders, float separator / big bellows type pipeline surge attenuators and
expansion / contraction volume compensators, surge alleviators, and shock alleviators.

Shock-Guard. USA: Surge Alleviators | Water-Hammer.com: Water Hammer
ShockGuard.co.uk: Shock Alleviators | Suction-Stabilizers: Suction Stabilizers

Information about energy saving in pumping systems, standby emergency power, safety shutdown systems,
hydraulic accumulators, and hydropneumatic accumulators.

Accumulators-Hyd: Hydraulic Accumulators
Accumulators.co.uk: Hydropneumatic Accumulators | HydroTrole: Hydraulic and Control Engineering

Protection against excess flow. Protect against toxic spills when pipes burst, guard against gushers and fluid
loss when hoses split. Flow-Guard against excess flow floods with flow fuses and breather bags.

FlowGuard: Flow-Guard - Flow Fuses and Breather Bags




Fluid Flow Control Fluid-Flow-Control.com The Fluid Flow Control Source Pumps Accumulators Filters Dampers Heat Exchangers Valves Mixers P.I. / Pressure Indicators Controls Meters Vessels